 |
        |
|
     |
 |
|
 |
|
| |
|  | Flashlight Holder Assembly
For bicycle mount:
Position holder on top side of handlebar with open side up. Align clamp under handlebar to match holes in holder. Insert short (5/8") screws down through holder and clamp. Loosely attach nuts, position holder and tighten nuts.
For wall mount:
Position holder on wall stud or solid wood and mark screw locations.
Drill two 3/32" pilot holes approximately 1" deep. Lubricate screws with soap or grease and attach holder to wall using the two 1" pointed wood screws.
Contents of bag:
1-flashlight holder
1-clamp
2-5/8" machine screws
2-hex nuts
2-1" wood screws
|
|
|
|
| |
 |
|
